CCS PD3-10024-8-EI 数字光源控制器
***
- 产品详情
- 产品参数
This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 95 W.
Connection with the HLV2-series Spot Lights is also available.
This Control Unit operates on a 100 to 240 VAC input and measures 220 x 82.6 x 120 mm (width x depth x height). External control through Ethernet communications.
 |  |
Download drawing files(PDF/DXF) from Here. | |
| Direct number | 2000782 | |
|---|---|---|
| Lighting method | Constant/Strobe lighting | |
| Drive method | 24V LIGHT connectors: Constant-voltage system, HLV LIGHT connectors: Constant-current system | |
| Intensity control method | 24V LIGHT connectors: PWM control and lighting time control, HLV LIGHT connectors: Variable-current control | |
| No. of channels | 8 channels | |
| Applicable Light Units | 24V LIGHT connectors: Lights with 24-VDC input, HLV LIGHT connectors: HLV2/HLV-series Spot Lights, Total for 8 channels: 95 W (High-output Light connector: 95 W/1 connector) | |
| PWM Frequency | 125 kHz | |
| Light control (manual) | Use of the setting switch on the front panel (256 steps) | |
| Light control (remote) | Command input via TCP/IP, UDP/IP communications | |
| Error detection display | Digital display on the front-panel; OCP: Overcurrent error, EFN: Fan Stop Error, and EID: ID error (HLV2/HLV-series Spot Lights only) | |
| Error detection output | Send the Error command when overcurrent is detected. | |
| Over current protection | Operates at 107% of rated output current or higher. Reset by pressing operation setting switch for at least 1 second or by cycling the power supply. *Do not intentionally short-circuit the positive and negative output terminals. | |
| Input voltage (rating) | *This product operates at a power supply voltage of 100 to 240 VAC. The supplied powercord, however, is for use with 100 V. If this product is to be used at 200 V or above, use a 200 V power cord. | |
| Power consumption (typ.) | 130 VA | |
| Frequency | 50/60 Hz | |
| Inrush current (typ.) | 15 A (at 100 VAC), 30 A (at 200 VAC) from a cold start | |
| Output voltage (rating) | 24 VDC | |
| Output current (rating) | Total for 8 channels: 3.95 A | |
| Conformed standards | CE, RoHS | |
| Output connector | SMP-03V-BC x 16 pieces, ELR-02V x 1 piece | |
| External control connector | Trigger input: MIL connector (MIL-C-83503 compliant), 10 pins For setting the light intensity/mode: RJ-45 | |
| Cooling method | Forced air cooling | |
| Material | Alminium, ABS | |
| Operating temperature and humidity | Temperature: 0 to 40ºC, Humidity: 20 to 85%RH (No condensation) | |
| Storage temperature and humidity | Temperature: -20 to 60ºC, Humidity: 20 to 85%RH (No condensation) | |
| Dimensions | W 220 mm x D 82.6 mm x H 120 mm | |
| Weight | 1500 g | |
| Accessories | 2m long 3-prong AC power cord with ground terminal x 1, Instruction Guide x 1, Brackets for the PD3-series Control Unit (BK-PD3) x 1 (including 2 brackets) | |
| Options |
|
Note: Select a model after making sure that the total power consumption of the Light Units is within the output power capacity of the Control Unit.
希望立即了解新一代 CCS光源控制器？
价格
***
编号
PD3-10024-8-EI
限时免费 立即开启线上经营